Filter
Top Products
D1260/D1260B | Owner's Manual | Appendix - System Trouble Displays
96 Bosch Security Systems | 9/04 | 50410D
System Trouble Displays
If you see any of the system trouble displays shown
below, contact your security company to determine
whether repairs are needed.
The Silence> soft key is only displayed if
a trouble tone is present. Press the
Silence> soft key to silence the following
trouble conditions.
Call for Service
Call your security company. Your security system may
have failed (Your Security Co. will be replaced with
the name of your security company).
Service Panel
Indicates a problem with the panel. The panel is not
operating (Your Security Co. will be replaced with the
name of your security company). Call your security
company for service.
Service Parameter
Indicates a problem with the panel. Your panel may
not be operating properly (Your Alarm Company will
be replaced with the name of your security company).
Call your security company for service.
Service Low Battery
Indicates the security system’s battery is low, or
temporarily draining faster than the system can charge
it. If this display remains or appears frequently, call
your security company for service.
Service AC Fail
Indicates that AC power to the security system is
interrupted. Check the plug-in transformer and circuit
breaker. Entering COMMAND 4 silences the trouble
buzz. The display clears when AC power returns.
Service Missing Battery
Indicates the security system’s battery is disconnected
or shorted.
Service Communication Fail
Your security system makes repeated attempts to
communicate with the security company.
In the event your security system fails to communicate,
the command center buzzes and displays
Comm Fail Route Grp1
(Route Group number can
be from 1 to 4)
Notify your security company of the communication
trouble.
Service Keypad
Indicates that a command center, other than the one
displaying the message, is in a trouble condition.
Notify your security company.