Filter
Top Products
D1260/D1260B | Owner's Manual | Part II: System Commands - Special Alerts (COMMAND + 7 and COMMAND +
9)
30 Bosch Security Systems | 9/04 | 50410D
4. When exit delay time expires and the system turns
on, the display shows:
5. When performing a COMMAND 8 and no points
are faulted or if the points return to normal before
the exit delay time expires, the system is turned on
as in COMMAND 3.
6. To disarm, enter your personal passcode and press
ENTER.
Special Alerts (COMMAND + 7 and
COMMAND + 9)
Description
Commands 7 and 9 can be programmed to respond to
a choice of numerous situations that may need
immediate attention. They may also be used to send a
silent alarm to your security company without
sounding an alarm signal on the premises. Check with
your security company for the options they offer.
Using COMMAND 7:
1. The display shows disarmed idle text.
Press the COMMAND key. The display shows
*System Command*
.
2. Press the 7 key.
If you prefer, you may use the Command
Menu in place of steps 2 and 3 to initiate
this function.
Press the MENU> soft key to enter the
Command Menu.
Press NEXT> soft key repeatedly.
When you reach the USER CMD 7 ?>
prompt, press its adjacent soft key.
Press ENTER.