Filter
Top Products
D1260/D1260B | Owner's Manual | Part III: Advanced Commands - SEND REPORT ? (COMMAND + 4+1 or 4+2)
Bosch Security Systems | 9/04 | 50410D 37
If you prefer, you may use the Command
Menu in place of steps 2 and 3 to initiate
this function.
Press the MENU> soft key to enter the
Command Menu.
Press NEXT> soft key repeatedly.
When you reach the SEND REPORT ?>
prompt, press its adjacent soft key.
Another menu appears allowing for the
selection of sending a test report (Test
Rpt?>) or a status report (Status Rpt?>).
Press either one of the adjacent soft keys.
4. The keypad displays
Sending report…
Please
wait…
until the report is transmitted to the
security company.
5. When the transmission is complete the keypad
displays
Report sent
for 5 seconds.
If the <Exit soft key is pressed before 5
seconds have elapsed, idle text will be
displayed.
The display returns to idle text.
6. If the test (or status) report doesn‘t successfully
transmit to the central station, the keypad may
sound a trouble tone and display
Comm Fail
Route Grp#
(# = 1-4) after numerous unsuccessful
attempts.