Filter
Top Products
D1260/D1260B | Owner's Manual | Part III: Advanced Commands - CHANGE DISPLAY (COMMAND + 4 + 9)
44 Bosch Security Systems | 9/04 | 50410D
8. After selecting whether to disable or enable the
level, the display prompts you again to enter an
Authority Level to modify.
9. Press the
<Exit
soft key when you are finished.
CHANGE DISPLAY (COMMAND + 4 + 9)
This function presents three options:
• dim the display
• brighten the display
• continuously show the time and date in the display.
Brighten/Dim Display
You can change your keypad’s display to make the
backlit LCD display bright or dim. When the display is
dim, the tones are softer than when the display is
bright. Use this option for keypads in bedrooms where
a brighter display and louder tones could interfere with
sleep.
If you dim the keypad backlit display and an alarm or
trouble condition arises, the display automatically
brightens and the volume increases. The backlit display
returns to dim lighting when you clear the alarm or
trouble condition.
Show Continuous Time/Date
Use this function to replace the disarmed idle text with
a continuous time and date display and to prevent a
passersby from knowing the status of your system.
Any time your keypad has an event to display, the time
and date display is automatically removed. To return
the time and date display, you must perform this
function again.
1. Ensure your keypad shows idle disarmed text.
2. Press the COMMAND key. The display shows
*System Command*
.
3. Press the 4 and then the 9 key.