Filter
Top Products
D1260/D1260B | Owner's Manual | Part III: Advanced Commands - BYPASS A POINT? (COMMAND + 0)
34 Bosch Security Systems | 9/04 | 50410D
5. If a digit is pressed, the display shows
Enter point
number: #
. As soon as a digit key is pressed, the
display changes to
Entering point number:
.
(# is the point number entered)
If you know the point number you wish to bypass,
enter the number and press the Enter> soft key or
the ENTER button.
If you don’t know the number of the point you
wish to bypass, you can view the list of devices that
can be bypassed by pressing the Next> soft key.
Continuously pressing Next> scrolls through the
available points that can be bypassed.
When the point text of the point you wish to
bypass appears, press the Bypass> soft key.
One of the following messages displays (FRONT
DOOR is used here as an example):
•
FRONT DOOR is not bypassed
indicates the
point is not bypassed and the option is given
to bypass it.
•
FRONT DOOR is now bypassed.
indicates
the point was successfully bypassed.
•
FRONT DOOR is already bypassed.
indicates that the point has already been
bypassed.
•
FRONT DOOR cannot by bypassed.
indicates the system is programmed not to
allow that point to be bypassed.
•
Invalid point Please try again.
indicates that
the entered point doesn’t exist and the display
returns to allow another point to be entered.
•
No additional points.
indicates that there are
no more points that can be bypassed.
6. You can return to idle text by pressing <Exit.
7. If the bypassed point is a 24-hour point, the
message
24Hr Point Bypassed
begins alternating
in the display with
A1 AREA IS OFF
.
If the bypassed point is a Fire Point, the message
Fire Point Bypassed
begins alternating in the
display with
A1 AREA IS OFF
.