Filter
Top Products
Chapter 5 Managing Physical Ports
46 Avaya M770 ATM Switch User’s Guide
To display DS3 counter information for all far end DS3 physical ports for the current
interval, use the pport show ds3counters fe current command.
Note: The pport show ds3counters command displays several parameters for
near end (ne) counter information (PESS, PSESS, LCVS, PCVS, LESS) that are not
displayed for far end (fe) counter information.
To display DS3 counter information for all near end DS3 physical ports in all
intervals, use the pport show ds3counters ne interval command.
Command:
M4-DS3s8:/>pport show ds3counters fe current
Output:
Link far end curent counters
----------------------
Port
ID
CESS CSES
S
CCVS UASS
8.1 0 0 0 0
8.2 0 0 0 0
8.3 0 0 0 0
8.4 0 0 0 0
Command:
M4-DS3s8:/>pport show ds3counters ne interval
Output:
Link near end interval counters for
port 8.1
----------------------
Intvl PESS PSES
S
UASS LCVS PCVS LESS CCVS CESS CSES
S
1 000000000
2 000000000
3 000000000
4 000000000
5 000000000
Link near end interval counters for
port 8.2
----------------------
Intvl PESS PSES
S
UASS LCVS PCVS LESS CCVS CESS CSES
S
1 000000000
2 000000000
3 000000000
4 000000000
5 000000000