Filter
Top Products
Appendix B Using BOOT Loader
Avaya M770 ATM Switch User’s Guide 287
Disabling the pager
To disable the pager, use the terminal pager disable
command.
Viewing the prompt
To display the current system prompt, use the terminal prompt
command.
Changing the prompt
To change the system prompt, use the terminal prompt
command.
Note: The Boot Loader prompt is not saved when changed. The next time the loader
is run the prompt will revert to the default setting of “Monitor”.
Command:
M15-155s8:/>terminal pager disable
Output:
pager disabled
Command:
M15-155s8:/>terminal prompt
Output:
prompt is “Monitor”
Command:
M15-155s8:/>terminal prompt Monitor_M770
Output:
Monitor_M770:/>