Filter
Top Products
Chapter 20 Signaling Security (Access Control) Commands
Avaya M770 ATM Switch User’s Guide 255
Filter’s state
A filter may be in one of two states: ON or OFF. When a filter is in the OFF state it is
ignored when testing a call setup and has no effect.:
Deleting a template
Command:
M15-155s8:/> vport sig sigsecurity filter disable <vport>
<priority> <incoming|outgoing>
or:
M15-155s8:/> vport sig sigsecurity filter enable <vport>
<priority> <incoming|outgoing>
Example:
M15-155s8:/> vport sig sigsecurity filter disable 9.1.0 10
incoming
Parameters
<vport> The filter’s vport
<priority> The filter’s priority - (1..16)
<incoming|
outgoing>
The filter’s direction (applicable to incoming
or outgoing calls)
Command:
M15-155s8:/> vport sig sigsecurity filter remove <vport>
<priority> <incoming|outgoing>
Example:
M15-155s8:/> vport sig sigsecurity filter remove 9.1.0 10
incoming
Parameters
<vport> The filter’s vport
<priority> The filter’s priority - (1..16)
<incoming|
outgoing>
The filter’s direction (applicable to incoming
or outgoing calls)