Filter
Top Products
Chapter 10 Managing PNNI Routing
136 Avaya M770 ATM Switch User’s Guide
Local Reachable Addresses
To show local reachable addresses (RAs), use the following command:
The output of this command displays a list of all local Reachable Addresses. For
Number of
transmitted
PTSE
requests
The number of transmitted PTSE requests (during PNNI
Database synchronization phase).
Number of
received
PTSE acks
The number of PTSE acknowledgments that were received from
the neighboring peer.
Number of
transmitted
PTSE acks
The number of PTSE acknowledgments that were transmitted to
the neighboring peer.
Nbr Port Provides a table* with information about all the ports on the
physical node that are connected to the same neighbor. The local
ports may be from any slot on the switch.
*This table is applicable to physical level neighbors.
Local Port The identification (slot.port) of the local end of the link to the
neighbor.
Remote Port The identification of the remote end (slot.port).
Hub Slot The slot on which the local end of the link resides.
Flood Status A true/false value indicating which of the parallel links is used
for flooding of PTSEs. In case there is only one link to a neighbor
that link will be used for flooding of PTSEs.
Command:
M15-155s8:/>route pnni local ra
Examples:
Local Ra: Len = 152 bits
Prefix =
39.03.00.00.00.00.00.00.00.00.00.00.00.00.40.0D.87.01.5C
Port Type Scope
-----------------------------------------
08.00.00.00 Internal 0
Field Description