Filter
Top Products
Chapter 12 Managing SNMP
Avaya M770 ATM Switch User’s Guide 177
Viewing or changing secure current table row timeout
Timeout is the duration of time before the NMS’s are removed from the secure
current tables. By default timeout is set to 300 seconds.
To display or set the timeout for security information, use the snmp secure
timeout
command.
Listing all current NMS’s accessing the Avaya M770 ATM Switch
You can list all the NMS addresses that are currently communicating with the M770
ATM Switch.
For each NMS in the table the following information is displayed; an index entry
number for the NMS, the address type of the NMS, the IP address of the NMS, and
when the current NMS last accessed the M770 ATM Switch.
Note: If SNMP security is enabled then a maximum of 15 concurrent NMS’s can
manage the M770 ATM Switch, otherwise up to 20 concurrent NMS’s can manage
the switch.
To display the current security information, use the
snmp secure current
command.
Command:
M15-155s8:/>snmp secure timeout [<timeval>]
Output:
Current table row timeout is 300 seconds
Parameter:
<timeval>
A timeout value (between 20 and 3000) seconds
Command:
M15-155s8:/>snmp secure current
Output:
Secure mode is currently Disabled
SNMP Security Information : currently active NMS's
-------------------------------------------------------------
Index Type IP AddressTime Since Last Access (H:M:S)
1 IP 194.32.220.1290:02:50
2 IP 194.32.220.260:02:20