Avaya M770 Plumbing Product User Manual


 
Chapter 14 Managing the LECS
194 Avaya M770 ATM Switch User’s Guide
Managing Resilient LECS Candidates
Note: If you are not planning to use PNNI routing or want the M770 ATM Switch
switches in the third party environments to host a resilient LECS, contact Avaya
Technical Support. They can provide you with further information on what
configuration is required, depending on your third party switch, to get LECS
redundancy on your M770 ATM Switch switches.
For information on when to create candidates in third party environments, see
Proprietary resilient LECS in Chapter 13, “LANE Services”.
Displaying a resilient LECS election candidate
To list all the resilient LECS candidates on the network that are known to the local
LECS, use the
lane lecs resilient show command:
Command:
M15-155s8:/>lane lecs resilient show
Output:
Mesh state is running, local LECS state is standby
Resilient LECS table
--------------------
Index Election Protocol Endpoint AddressType
0) 39.84.0F.80.01.BC.61.DF.00.07.80.20.00.00.00.6F.07.80.20.7FPVC
1) 39.84.0F.80.01.BC.61.DF.00.07.20.9C.00.00.00.6F.07.20.9C.7FLOCAL
Index LECS Address
0) 47.00.70.00.00.00.00.00.00.00.00.00.00.00.A0.3E.00.00.01.00
1) 47.00.70.00.00.00.00.00.00.00.00.00.00.00.A0.3E.00.00.01.00
Index Status Link StatePriorityChecksumUptime
0) standby reachable0 8570:00:00
1
) active reachable12885714 days, 8:28:29