Filter
Top Products
Chapter 15 Managing the LES/BUS
Avaya M770 ATM Switch User’s Guide 205
To display the current status of a LES, specify the name of the ELAN that currently
hosts the LES.
Restarting a local LES and BUS
Certain changes made to the characteristic of a LES are not immediate, for these
changes to take effect you must restart the LES.
Note: When restarting a LES, all attached LECs will be thrown off the ELAN hosted
by the LES, but they will rejoin the ELAN when the LES restarts, if the LEC criteria
is still met. The restart command also affects the BUS functions.
To restart a local LES and BUS, use the lane les restart command.
Changing the ELAN name that the LES will host
You can change the name of the ELAN that is currently hosted by a LES. The new
ELAN must be somewhere on the network and be known to the LECS that your LES
is hosting.
Command:
M15-155s8:/>lane les state <elan-name>
Example:
M15-155s8:/>lane les state default
LES ‘default’ is enabled
Command:
M15-155s8:/>lane les restart <elan-name>
Parameters:
<elan-name> The name of the ELAN that currently hosts the LES that
you wish to restart. This parameter is case-sensitive.