Filter
Top Products
Appendix B Using BOOT Loader
Avaya M770 ATM Switch User’s Guide 279
System-wide Commands
This section describes system commands that are available in the BOOT Loader.
Viewing the invariant information in BOOT Loader
Invariant information is shared between the BOOT PROM image, the BOOT Loader
image and the main image. This is common information in all the image files.
To view invariant information, use the system invariant
command.
Command:
M15-155s8:/>system invariant
Output:
Software is running in 1.1+ mode
Serial Number is set to:....
BIA is set to :0000f6123456
Loader 1 : start OX12345678, length 345841
Loader 2 : start OXb2615678, length 345841
Selected boot image: 2
Done!
Software is running Indicates the software image that is currently
running on the switch.
BIA is set to The BIA of the switch.
Loader is started The BOOT Loader start address (in hexadecimals)
and the length of the BOOT Loader file.
Selected boot image The BOOT Loader image that has been selected.