Filter
Top Products
Chapter 12 Managing SNMP
Avaya M770 ATM Switch User’s Guide 173
Show the list of read-only community names
To list all the read-only community names, use the snmp community ro show
command.
Set the read-write community name
To add a specified name to the list of read-write community names, use the snmp
community rw add command.
Delete the read-write community name
To delete an element of the read-write community names' list, use the snmp
community rw delete command .
The element is specified by its number
.
Show the list of read-write community names
To list all the read-write community names, use the snmp community rw show
command .
Command:
M15-155s8:/>snmp community ro show
Example:
M15-155s8:/>snmp community ro show
Output:
Read-Only community names
=========================
1. public
2. ron1
3. moty
3. gidi
4. nancy
5. andrew
Done!
Command:
M15-155s8:/>snmp community rw add <read-write-community-name>
Command:
M15-155s8:/>snmp community rw delete <read-number>
Command:
M15-155s8:/>snmp community rw show
Example:
M15-155s8:/>snmp community rw show
Output:
Read-Write community names
=========================
1. public
Done!