Filter
Top Products
65NetworkAIR FM DX 60 Hz Operation, Maintenance, and Troubleshooting
Control console
After you log on at the control console, as described in “Remote access to the control console” on
page 64:
1. Choose Network from the Control Console menu.
2. Choose
TCP/IP from the Network menu.
3. If you are not using a
BOOTP or DHCP server to configure the TCP/IP settings, select the Boot
Mode menu. Select Manual boot mode, and then press
ESC to return to the TCP/IP menu.
(Changes will take effect when you log out.)
4. Set the System
IP, Subnet Mask, and Default Gateway address values.
5. Press
CTRL+C to exit to the Control Console menu.
6. Log out (option 4 in the Control Console menu)