Filter
Top Products
7NetworkAIR FM DX 60 Hz Operation, Maintenance, and Troubleshooting
Main menu screen
On any top-level status screen, press the ENTER or ESC key to open the main menu screen.
Note: If the display interface is inactive for ten minutes (the default delay), it will return to the
scrolling status screens. To change this delay, use the Time-out setting under the Password
menu.
Navigating the interface
Selector arrows. Press the up or down arrow key to move the selector arrow
to a menu option or
setting. Press the
ENTER key to view the selected screen or modify the setting.
Continue arrows. Continue arrows
indicate that additional options or settings are available on a
menu or status screen. Press the up or down arrow key to view the additional items.
Input arrows. Input arrows
next to a selected setting indicate that the setting can be modified by
pressing the up or down arrow key. Press the
ENTER key to save the change or the ESC key to cancel the
change.
Password entry
The Module has two levels of password protection:
• User password for users who need to change basic and environmental settings
• Service password for users who need to change advanced options or modify settings that control
the components in the Module
When you try to change any of the settings, the display prompts you to enter your password.
The default value for both the User and Service password is APC (upper
case). To enter your password, use the up or
down arrow keys to scroll
through the alphabet. At the desired letter, press the
ENTER key to select the
letter and move the cursor to the next letter position. After selecting the last
letter of your password, press the
ENTER key once more to submit your
password.
Note: Passwords are case-sensitive.
Date: 18-Jun-2007
Time: 13:15:23
na0158a
na0281a
Date: 18-Jun-2007
Time: 13:15:23
Date: 18-Jun-2007
Time: 13:15:23
na0254a
Service Password:
********
User Password:
APC*****
na0436a