Filter
Top Products
NetworkAIR FM DX 60 Hz Operation, Maintenance, and Troubleshooting
10
Power On/Off Procedure
Power on
1. Turn utility power on.
2. Set each main breaker located behind the left door to the “1” (ON) position by pushing each
breaker lever to the left.
Note: The main breakers may be in the trip position (visible yellow indication) due
to a previous power off. Reset the breakers by pushing the levers first to the right
(off) then to the left (on).
Note: Wait approximately 30 seconds for the system to start.
See “Start the System” on page 8 for system startup procedure.
Note: If power is lost, the system will continue in the last selected mode when
power returns. No action is required.
Power off
1. Stop the System.
See “Stop the System” on page 8.
2. Push the red power interrupt button on the left front door.
3. Turn utility power off.