Filter
Top Products
NetworkAIR FM DX 60 Hz Operation, Maintenance, and Troubleshooting48
Network Configuration
Configure the network settings for the Network Management Card from the display interface. The
management card allows remote control and configuration of the System.
Network configuration
Path: Main > Setup > System # > Network Config
MAC Address. Displays the unique network identifier assigned to each Network Management Card at
the factory.
Mode. Set the method by which the Network Management Card for the System will acquire its network
settings:
• Manual—Scroll down and enter the network settings for the Network Management Card.
• BOOTP—Set the Network Management Card to obtain its network settings from a BOOTP
server.
• DHCP— Set theNetwork Management Card to obtain its network settings from a DHCP server.
IP. Set the IP address assigned to the Network Management Card (manual mode only).
MSK. Set the subnet mask for the Network Management Card (manual mode only).
GW. Set the default gateway for the Network Management Card Network Management Card(manual
mode only).
Accept Changes. You must select Accept Changes to save any modifications to the IP address, subnet
mask, or default gateway.