Filter
Top Products
NetworkAIR FM DX 60 Hz Operation, Maintenance, and Troubleshooting
6
Using the Display Interface
Scrolling status screens
The first time you apply power to the Module, the display initializes and runs an LED and alarm-
tone test.
After start-up, the interface displays the firmware revision number (if the fast start-up is disabled).
The display interface then scrolls automatically and continuously through the following nine screens
of status information.
Press the up or down arrow key to interrupt the automatic scrolling and view a specific status screen.
To return to the scrolling status screens, press the
ESC key from the main menu screen.
Status Screen Name Status Information Displayed
Control Temp & Humidity • Temperature and humidity at the sensors being used to control the
environment
• Remote Temperature and Humidity (optional)
• Humidity Control Method (dew point or relative humidity)
Cool/Dehum Demands • Cool Demand %
• Dehumidify Demand %
• Actual Output %
Reheat Demand • Reheat Demand %
(Electric SCR only)
Humidify Demand • Humidify Demand %
• Humidify Actual %
Group Status • Number of Systems
• Setpoint Share: On/Off
• Demand Fighting: On/Off
Group Status • System number
• Role
• State
Active Alarms • Alarm number
• Module identifier
•Alarm name
• Time stamp
Setpoints • Cool °C (or °F)
• Reheat °C (or °F)
Setpoints • Dehumidify % RH
•Humidify % RH