Filter
Top Products
98 Specifications and Application Information
Table A-2. Supplemental Characteristics for Agilent E4350B/E4351B SAS (continued)
INH/FLT Characteristics
Maximum ratings:
FLT Terminals (1 & 2):
INH Terminals (3 & 4):
16.5 Vdc between terminals 1 & 2; 3 & 4;
and from 1 or 2 to chassis ground
Low-level output current = 1.25 mA max.
Low-level output voltage = 0.5 V max.
Low-level input voltage = 0.8 V max.
High-level input voltage = 2 V min.
Low-level input current = 1 mA
Pulse width = 100
µ
s min.
Time delay = 4 ms typical
Digital I/O Characteristics
Maximum ratings:
Digital OUT Port 0,1,2
(open collector)
Digital IN Port 2: (internal
pull-up)
same as INH/FLT Characteristics
Output leakage @ 16V = 0.1 mA (ports 0,1)
= 12.5 mA (port 2)
Output leakage @ 5V = 0.1 mA (ports 0,1)
= 0.25 mA (port 2)
Low-level output sink current @ 0.5 V = 4 mA
Low-level output sink current @ 1 V = 50 mA
Low-level input current @ 0.4 V = 1.25 mA
High-level input current @ 5 V = 0.25 mA
Low-level input voltage = 0.8 V max.
High level input voltage = 2.0 V min.
GPIB Interface Capabilities
Languages:
Interface:
SCPI
AH1, C0, DC1, DT1, E1, LE4, PP0, RL1, SH1,SR1,
TE6
Serial Link Capabilities
(multiple supplies sharing
one GPIB primary address)
Max number of units:
Max number of linked units:
Max total chain length:
16
15
30 m (100 ft)
Calibration Interval
(recommended) 1 year
(from date the unit is put into service)
Regulatory Compliance
Listing pending:
Certified to:
Conforms to:
Complies with:
UL 3111-1
CSA 22.2 No. 1010.1
IEC 1010-1
EMC directive 89/336
EEC (ISM Group1 Class B)
Dimensions
(see figure 3-1) Height:
Width:
Depth (with safety cover):
132.6 mm (5.22 in.)
425.5 mm (16.75 in.)
497.8 mm (19.6 in.)
Weight
Net 25 kg (54 lbs.)
Shipping 28 kg (61 lbs.)