Filter
Top Products
Specifications and Application Information 97
Table A-2. Supplemental Characteristics for Agilent E4350B/E4351B SAS (continued)
Parameter Both Models
AC Line Voltage Ratings
(selectable via internal switching
100, 120, 220, 240 Vac: -13%, +6 %
- see Appendix B)
230 Vac
1
:
-10%, +10%
Frequency Range: 47-63 Hz
Maximum Input Power
1380 VA; 1100 W
(120 W with no load)
Maximum AC Line Current Ratings
in 100 Vac range: 12 A rms (15 A fuse)
in 120 Vac range: 10 A rms (12 A fuse)
in 220 Vac range: 5.7 A rms (7 A fuse)
in 230 Vac range: 5.3 A rms (7 A fuse)
in 240 Vac range: 5.3 A rms (7 A fuse)
Output Terminal Isolation
(maximum, from chassis ground)
±
240 Vdc
Maximum Reverse Diode Current
(with fan running) a continuous reverse diode current equal
to the output current rating of the unit
Load Lead Drop with Remote Sensing
Simulator/Table mode: up to 2 volts + (Voc - Vmp)
Fixed mode: up to 2 volts total
Current Sinking Capability
Simulator/Table mode: 350 mA
Fixed mode: 420 mA
Command Processing Time
(Average time for output voltage to change after
receipt of digital data when the unit is connected
directly to the GPIB Bus)
20 ms
Voltage Programming Rise/Fall Time
(time for output to change from 90% to 10% or
10% to 90% of its total excursion)
< 8 ms
Voltage Programming Settling Time
(time for output change to settle within 0.1% of the
rating of the unit; either 60mV or 120 mV)
< 25 ms
Monotonicity
Output is monotonic over entire rated
voltage, current, temperature range
Auto-Parallel Configuration
Up to three identical models
Non-volatile Savable States
Memory Locations: 5 (0 through 4)
Memory Write Cycles: 40,000 typical
Prestored state location 0
1
Unit wiring for 230 Vac ± 10% is identical to 240 Vac -13% + 6%.