2-936
Catalyst 6500 Series Switch Command Reference—Release 8.1
78-15474-01
Chapter 2 Catalyst 6500 Series Switch and ROM Monitor Commands
show port flowcontrol
show port flowcontrol
To display per-port status information and statistics related to flow control, use the show port
flowcontrol command.
show port flowcontrol [mod[/port]]
Syntax Description
Defaults This command has no default settings.
Command Types Switch command.
Command Modes Normal.
Usage Guidelines If you do not specify a mod value, the ports on all modules are shown.
If you do not specify a port value, all the ports on the module are shown.
Examples This example shows how to display the flow-control port status and statistics for module 6:
Console> show port flowcontrol 6
Port Send FlowControl Receive FlowControl RxPause TxPause
admin oper admin oper
----- -------- -------- -------- -------- ---------- ----------
6/1 desired off off off 0 0
6/2 desired off off off 0 0
6/3 desired off off off 0 0
6/4 desired off off off 0 0
6/5 desired off off off 0 0
6/6 desired off off off 0 0
6/7 desired off off off 0 0
6/8 desired off off off 0 0
Console>
mod (Optional) Number of the module.
port (Optional) Number of the port on the module.
