Chapter 2 Catalyst 6500 Series Switch and ROM Monitor Commands
set rgmp
2-528
Catalyst 6500 Series Switch Command Reference—Release 8.1
78-15474-01
set rgmp
To enable or disable the Router-Ports Group Management Protocol (RGMP) feature on the switch, use
the set rgmp command.
set rgmp {enable | disable}
Syntax Description
Defaults The default is RGMP is disabled.
Command Types Switch command.
Command Modes Privileged.
Usage Guidelines The set rgmp command affects the entire switch. You cannot enable or disable RGMP on a per-VLAN
basis.
The RGMP feature is operational only if IGMP snooping is enabled on the switch. (See the set igmp
command.)
Examples This example shows how to enable RGMP on the switch:
Console> (enable) set rgmp enable
RGMP is enabled.
Console> (enable)
This example shows how to disable RGMP on the switch:
Console> (enable) set rgmp disable
RGMP is disabled.
Console> (enable)
Related Commands clear rgmp statistics
set igmp
show rgmp group
show rgmp statistics
enable Enables RGMP on the switch.
disable Disables RGMP on the switch.
