A SERVICE OF

logo

Open as PDF
next previous
2-811
Catalyst 6500 Series Switch Command Reference—Release 8.1
78-15474-01
Chapter 2 Catalyst 6500 Series Switch and ROM Monitor Commands
show lcperroraction
show lcperroraction
To display how your system handles LCP errors when a module reports an ASIC problem to the Network
Management Processor (NMP), use the show lcperroraction command.
show lcperroraction
Syntax Description This command has no arguments or keywords.
Defaults This command has no default settings.
Command Types Switch command.
Command Modes Privileged.
Examples This example shows how to display the action that handles an LCP error:
Console> (enable) show lcperroraction
LCP action level is: system
Console> (enable)
Related Commands set lcperroraction