2-321
Catalyst 6500 Series Switch Command Reference—Release 8.1
78-15474-01
Chapter 2 Catalyst 6500 Series Switch and ROM Monitor Commands
set kerberos local-realm
set kerberos local-realm
To configure a switch to authenticate users defined in the Kerberos database, use the set kerberos
local-realm command.
set kerberos local-realm kerberos_realm
Syntax Description
Defaults The default value is a NULL string.
Command Types Switch command.
Command Modes Privileged.
Usage Guidelines To authenticate a user defined in the Kerberos database, you must configure the switch to know the host
name or IP address of the host running the KDC and the name of the Kerberos realm.
You must enter the Kerberos realm name in all uppercase characters.
Examples This example shows how to set a default Kerberos local realm for the switch:
Console> (enable) set kerberos local-realm CISCO.COM
Kerberos local realm for this switch set to CISCO.COM.
Console> (enable)
Related Commands clear kerberos realm
set kerberos realm
show kerberos
kerberos_realm IP address or name (in uppercase characters) of the Kerberos realm.
