A SERVICE OF

logo

1-18
Catalyst 6500 Series Switch Command Reference—Release 8.1
78-15474-01
Chapter 1 Command-Line Interfaces
ROM Monitor CLI
The manual boot command has the following syntax:
Note Enter the copy file-id {tftp | flash | file-id} command to obtain an image from the network.
bootBoot from ROM
boot [-xv] [device:][imagename]Boot from the local device. If you do not specify an image name,
the system defaults to the first valid file in the device. The image name is case sensitive.
Once you are in ROM-monitor mode, the prompt changes to rommon 1>. While you are in ROM-monitor
mode, each time you enter a command, the number in the prompt increments by one.