2-383
Catalyst 6500 Series Switch Command Reference—Release 8.1
78-15474-01
Chapter 2 Catalyst 6500 Series Switch and ROM Monitor Commands
set multicast router
set multicast router
To configure a port manually as a multicast router port, use the set multicast router command.
set multicast router mod/port
Syntax Description
Defaults The default is no ports are configured as multicast router ports.
Command Types Switch command.
Command Modes Privileged.
Usage Guidelines When you enable IGMP snooping, the ports to which a multicast-capable router is attached are identified
automatically. The set multicast router command allows you to configure multicast router ports
statically.
Examples This example shows how to configure a multicast router port:
Console> (enable) set multicast router 3/1
Port 3/1 added to multicast router port list.
Console> (enable)
Related Commands clear multicast router
set igmp
show multicast group count
show multicast router
mod/port Number of the module and port on the module.
