A SERVICE OF

logo

2-534
Catalyst 6500 Series Switch Command Reference—Release 8.1
78-15474-01
Chapter 2 Catalyst 6500 Series Switch and ROM Monitor Commands
set security acl arp-inspection
Use the set security acl arp-inspection command in conjunction with the set security acl ip
arp-inspection command. For more information about configuring ARP inspection features, refer to the
“Configuring Access Control” chapter of the Catalyst 6500 Series Switch Software Configuration
Guide.
Examples This example shows how to enable the MAC address matching feature:
Console> (enable) set security acl arp-inspection match-mac enable
ARP Inspection match-mac feature enabled.
Console> (enable)
This example shows how to enable the address validation feature:
Console> (enable) set security acl arp-inspection address-validation enable
ARP Inspection address-validation feature enabled.
Console> (enable)
Related Commands set port arp-inspection
set security acl ip