A SERVICE OF

logo

Open as PDF
next previous
2-88
Catalyst 6500 Series Switch Command Reference—Release 8.1
78-15474-01
Chapter 2 Catalyst 6500 Series Switch and ROM Monitor Commands
clear qos dscp-cos-map
clear qos dscp-cos-map
To clear DSCP-to-CoS mapping set by the set qos dscp-cos-map command and return to the default
setting, use the clear qos dscp-cos-map command.
clear qos dscp-cos-map
Syntax Description This command has no arguments or keywords.
Defaults The default DSCP-to-CoS configuration is listed in Table 2-3.
Command Types Switch command.
Command Modes Privileged.
Examples This example shows how to clear the DSCP-to-CoS mapping table:
Console> (enable) clear qos dscp-cos-map
QoS dscp-cos-map setting restored to default.
Console> (enable)
Related Commands set qos dscp-cos-map
show qos maps
Table 2-3 DSCP-to-CoS Default Mapping
DSCP
0 to 7 8 to 15 16 to 23 24 to 31 32 to 39 40 to 47 48 to 55 56 to 63
CoS
01234567