Chapter 8. Packet Manager
8-4 ATLAS 550 User Manual 61200305L1-1
A
NNEX
A
TheendpointissignalingusingITU-TQ.933-A.
A
NNEX
D
TheendpointissignalingusingANSIT1.617-D.
LMI
The endpoint is signaling using Group of Four LMI specification.
S
IG
S
TATE
Read Security: 5
Indicates the current condition (i.e., active frame relay signaling) of this
packet endpoint, as defined by the frame relay configuration settings. This
field is either A
CTIVE
or I
NACTIVE
.
C
URRENT
P
ORT
Read Security: 5
Displays the connections for the packet endpoint. The letter
U
in this field
indicates that this packet endpoint is used in the P
ACKET
C
NCTS
map (also
see Packet Cncts on page 8-13). The remainder of the field indicates the
physical port to which this packet endpoint is connected, as defined in the
D
EDICATED
M
AP
(also see Dedicated Maps on page 10-1). If the port is a chan-
nelized interface such as a T1, the DS0 assignment is also provided.
PERFORMANCE
Displays performance information for each packet endpoint including E
ND
-
PNT
N
AME
(endpoint name), P
ROTOCOL
, L
INK
S
TATS
,andS
UBLINK
S
TATS
.
E
NDPNT
N
AME
Read Security: 5
Displays the packet endpoint name as defined in PACKET
E
NDPNTS
/C
ONFIG
(also see Config on page 8-6).
P
ROTOCOL
Read Security: 5
Displays the layer 2 protocol that this packet endpoint terminates as
defined in P
ACKET
E
NDPNTS
/C
ONFIG
(also see Config on page 8-6).
L
INK
S
TATS
Read Security: 5
Displays layer 2 performance statistics. This field is dependent on the type
of protocol (Frame Relay or TBOP) selected in P
ACKET
E
NDPNTS
/C
ONFIG
(also see Config on page 8-6).
Frame Relay Statistics
These fields reflect the total count since last cleared:
T
X
P
ACKETS
Total number of frame relay packets transmitted through this packet end-
point, including both user data (on all PVCs) and signaling.
R
X
P
ACKETS
Total number of frame relay packets received through this packet endpoint
(on all PVCs).
