Chapter 10. Dedicated Maps
10-2 ATLAS 550 User Manual 61200305L1-1
USING DEDICATED MAPS WITH FRAME RELAY
After packet endpoints are created, they must be connected to a physical
port. You can connect the endpoints using either the D
EDICATED
M
AP
or the
D
IAL
P
LAN
(see also, Chapter 11, Dial Plan). D
EDICATED
M
APS
“nail” the
endpoints to a service, and the D
IAL
P
LAN
associates a phone number with
the endpoint.
For packet links created within the P
ACKET
M
ANAGER
M
ENU
, use D
EDICATED
M
APS
(see Figure 10-2) to connect packet endpoints to a physical port. Nail
theendpointtoaservicebyselectingD
EDICATED
M
APS
and picking a phys-
ical slot (FROM S
LT
)andaport(P
ORT
/PEP)forthedata.AssigntheDS0s
(F
ROM
C
ONFIG
), and then set the service (TO S
LT
/S)toP
KT
E
NDPT
or P
KT
V
OICE
.
Figure 10-2. Dedicated Maps - Frame Relay
A
CTIVATE
M
AP
Write security:3; Read security:5
Activates a dedicated map—automatically or manually. You can have up to
five different dedicated maps, each with an optionally specified name.
AUTO
Automatically activates a particular dedicated map at the time and day
specified in A
CTIVATE
T
IME
(see Activate Time on page 10-6).
MAPS 1 THROUGH 5
Allows you to manually activate a specific dedicated map.
C
URRENT
M
AP
Read security: 5
Displays the name of the currently active dedicated map (read-only).
Instructions for Manually Activating a Dedicated Map
Step Action
1
Move the arrow keys to highlight the A
CTIVATE
M
AP
field and
press E
NTER
.
2
Move the arrow key to highlight the map of choice from the pop-
up menu list and press E
NTER
.
