Chapter 11. Dial Plan
61200305L1-1 ATLAS 550 User Manual 11-5
S
ECONDARY
S
EARCH
The same accept rules apply for all secondary number searches as for prima-
ry searches.
D
ATA
64K,
D
ATA
56K,
A
UDIO
,S
PEECH
Reflects the bearer capability the Network has provisioned for this line. If
the ISDN lines were purchased with different services provisioned, then
ATLAS 550 would send the call out of the port which supports the type of
service the call requires.
For example, the Network termination is on a pair of BRIs (with the same
phone number) with one provisioned fordata and the other for voice. By en-
abling data in one and not the other, ATLAS 550 ensures that calls bearing
data will be sent out the right BRI interface.
T
REAT
C
ALL
A
S
Allows the incoming call to be treated as the selected call type, regardless of
the actual incoming call type. The default selection, A
S
R
ECEIVED
, effectively
disables the feature by using the actual call type. Other options include D
ATA
64K and D
ATA
56K.
OUT#REJ
Write security: 3; Read security: 5
Defines the parameters for the outgoing calls that ATLAS 550 will not send
to the Network.
R
EJECT
N
UMBER
Identifies which numbers this endpoint will not pass on toward the Net-
work (PSTN). The reject list may consist of multiple entries. The reject list
maybeusedtomoreeasilyspecifythecallfilteringdesired.Thewildcards
are identical as in O
UT
#A
CCEPT
(see Out#Accept on page 11-3).
D
ATA
64K,
D
ATA
56K,
A
UDIO
,S
PEECH
Rejects outgoing calls based on call type. For example, setting the reject
number to $, Digital 56/64 to enabled, and Audio and Speech to disabled,
rejects all digital calls while not rejecting analog calls.
IFCE CONFIG
Sets configuration parameters for the endpoint. These parameters vary by
the type of port selected. For detailed information on the interface configu-
ration, refer to Interface Configurations on page 11-10.
The Reject list takes precedence over the Accept list. For example,
1-900-$ rejects all 1-900 long distance calls, and 1-$ rejects all long
distance calls.
This list may remain blank if the Accept list meets desired filtering.
