Chapter 9. Router
61200305L1-1 ATLAS 550 User Manual 9-15
UDP R
ELAY
Write security: 2; Read security:5
Configures the ATLAS 550 as a UDP (User Datagram Protocol) relay agent
to relay UDP broadcasts to a specified server IP address. UDP broadcasts
received on a given port may be relayed to, at most, one server.
ENABLED
Enables/disables UDP Relay. An entry in the UDP relay table can configure
the ATLAS 550 to relay either S
TANDARD
ports or up to three S
PECIFIED
ports.
S
TANDARD
RelaysthefollowingUDPprotocols:DHCP,TFTP,DNS,NTP,NBNS(Net-
BIOS Name Server), NBDG (NetBIOS DataGram), and BootP.
S
PECIFIED
Relays datagrams received on any of the specified ports.
RELAY TABLE
Sets server IP addresses and UDP relay ports.
E
NABLE
Enables the R
ELAY
T
ABLE
. This option can also be set to D
ISABLE
.
IP Defines IP addresses that will receive the relay packet.
UDP P
ORT
1 Specifies the UDP port to be relayed. Set to zero (0) to disable.
UDP P
ORT
2 Specifies the UDP port to be relayed. Set to zero (0) to disable.
UDP P
ORT
3 Specifies the UDP port to be relayed. Set to zero (0) to disable.
