Chapter 11. Dial Plan
11-30 ATLAS 550 User Manual 61200305L1-1
R
ANDOMIZE
T
IMER
Write security: 3; Read security: 5
Enables/disables random delay added to the redial timer to avoid glare.
R
ETRY
C
OUNT
Write security: 3; Read security: 5
Defines the number of redials to attempt.
O
UTGOING
C
ALLER
ID
Write security: 3; Read security: 5
Defines the presentation of the calling party number for this endpoint.
S
OURCE
ID
Write security: 3; Read security: 5
Used to simplify the creation of a D
IAL
P
LAN
in applications where the crite-
rion for switching calls to a certain endpoint is a function of which endpoint
originated the call. For further details, see Source ID on page 11-14.
R
OUTE
I
NCOMING
C
ALL
Write security: 3; Read security: 5
Used to define the method which incoming calls are associated to the
packet endpoints. This item can have three options:
U
SING
I
NCOMING
N
UM
Endpoint selection based on the incoming number.
U
SING
C
ALLING
P
ARTY
N
UM
Selection based on the Call ID as presented by the calling party. If this
option is selected, the C
ALL
P
ARTY
N
UMBER
field is made available to
the interface configuration. This number allows you to configure the
calling part number used to select this packet endpoint.
C
ALL
R
OUTING
T
ABLE
Read security: 5
This table is only visible if GROUP
is selected in the P
RT
/PEP field. The table
format changes, based on the selected routing option. See Figure 11-9,
below and Figure 11-10 on page 31. For each case, C
ALL
P
ARAMS
contain
O
UTDIAL
#, C
ALLER
ID, and S
OURCE
ID.
Figure 11-9. Call Routing Table for Routing Using Incoming Number
