Chapter 6. System Control Terminal Menus
6-22 ATLAS 550 User Manual 61200305L1-1
S
ELFTEST
Write security: 3; Read security: 5
Runs system-wide Self-test, Memory, Flash, Bootrom, and PortTests. These
tests are disruptive to all data traffic; therefore, do not run these tests on a
unit unless data interruptions are acceptable. To confirm self-test activation,
press
Y
; to cancel the self-test, press
N
.
S
ELECTED
T
ESTS
Write security: 3; Read security: 5
Allows the user to select a system-wide test or an individual card test.
Choose from ALL TESTS, S
LOT
:S
LT
0S
YS
C
TRL
,oranyotherinstalled
option/network module.
C
URRENT
T
EST
S
TATUS
Read security: 5
Displays which part of S
ELFTEST
is currently being run. See View Selftest Log
on page 6-22 for details on individual tests.
C
URRENT
S
LOT
/
P
ORT
Read security: 5
Displays slot and port of the subsystem currently being tested.
V
IEW
S
ELFTEST
L
OG
Read security: 5
Displays time-stamped log of the tests conducted and the Pass/Fail results.
Self-tests verify data integrity and processor control to each port. Each port
is looped back and a data pattern is sent and tested. The result of the self-
test on each installed port is listed with Pass/Fail results. Figure 6-6 shows
a typical test log.
Figure 6-6. View Self-test Log
The self-test log includes the following fields.:
I
DX
Index number of the log.
T
IME
Time and date of the log entry.
S
L
ATLAS 550 slot number.
P
T
ATLAS 550 port number.
E
VENT
Event description.
R
ESULT
Shows Pass/Fail results.
