Chapter 7. Module Terminal Menus
61200305L1-1 ATLAS 550 User Manual 7-3
ule to be marked O
FFLINE
, which may be useful in system troubleshooting.
If you choose O
FFLINE
, the module will not be in alarm condition, but will
display O
FFLINE
.
STATUS
Read security: 5
Displays status information on the ATLAS 550 ports and other installed
modulesasfollows:
REV
Read security: 5
Displays the hardware revision of the ATLAS 550 and other installed mod-
ules.
Modules Menu (T1Network Interface Module)
This section provides detailed information on the M
ODULES
/M
ENU
sub-
menus. M
ENU
provides access to commands that allow you to review the sta-
tus of various options, change the configuration for general parameters, and
initiate tests. This section only describes the menu options for the T1 Net-
work Interface Module. For details on menu options for other modules, refer
totheappropriatemodulemanuals.
To configure the T1 Network Interface Module in the Dial Plan, use the de-
scriptions provided for the Dual T1/PRI Module (see page 11-10).
Once a module is installed, S
TATE
must be set to O
NLINE
for the
ATLAS 550 to use the module for any data bandwidth.O
NLINE
is the default setting.
O
NLINE
The module is enabled and is responding to the system
controller’s status polls. This is the normal response of the
system.
N
O
R
ESPONSE
Themoduleisenabledbutisnotrespondingtothe
system controller’s status polls. This response indicates a
problem in the system or that the module is not installed.
E
MPTY
The system controller has not detected the presence of a
module in the system, nor has a module been manually
enabled for this option slot.
O
FFLINE
The module is installed but has been taken offline by a
user. The module is still responding to controller polls.
O
FFLINE
/N
O
R
ESPONSE
The module is installed but has been taken offline by a
user. The module is not responding to polls.
N
OT
S
UPPORTED
Themoduleisnotsupportedbythecurrentsystem
configuration.
