Chapter 12. Updating Firmware
61200305L1-1 ATLAS 550 User Manual 12-5
Complete Upload
When the update process has successfully completed, I
DLE
displays in
C
URRENT
U
PDATE
S
TATUS
,andM
ODULE
U
PDATE
C
OMPLETE
displays in
P
REVIOUS
U
PDATE
S
TATUS
. Either the module restarts immediately and
resumes operation, or it restarts at the specified time and day of the week—
depending on your selection.
Incomplete Upload
If an error occurred during the update process, P
REVIOUS
U
PDATE
S
TATUS
displays the appropriate error message (see Tabl e12-1). In this case, return
to step 3 and attempt the update process again. If the same error occurs, con-
tact ADTRAN Technical Support.
Table 12-1. TFTP Upload Messages
Message Meaning
Contacting Server Indicates communication with the TFTP Network Server is trying to be
established with the specified server address in the TFTP Server IP
Address field.
Beginning TFTP Transfer Indicates communication with the TFTP Network Server has been
established and the update file is being transferred between ATLAS
550 and the TFTP Network Server.
Completed Indicates the ATLAS 550 product successfully received the update file.
Error: File Not Found Indicates the TFTP Network Server was unable to locate the specified
file name or path in the TFTP Server Filename field.
Error: Access Violation Indicates the TFTP Network Server denied ATLAS 550 access to the
given update file name and path. Please verify appropriate user rights
are selected for the specified path.
Error: Illegal Operation An unknown operation was detected by ATLAS 550 when transferring
the update file from the TFTP Network Server.
Error: User Aborted Indicates the user selected Cancel Update to abort reception of the
update file from the TFTP Network Server.
