Wayne-Dalton 9800 Series Garage Door Opener User Manual


 
Pull Rope
DO NOT INSTALL PULL ROPES
ON DOORS WITH ELECTRIC
OPERATORS. CHILDREN MAY
BECOME ENTANGLED IN THE
ROPE CAUSING SEVERE OR
FATAL INJURY.
Measure and mark the jamb
approximately 48” to 50” (1220 to 1270
mm) from floor on the right or left side
of jamb. Drill 1/8” pilot hole for No. 6
screw eye. Tie the pull rope to the No.
6 screw eye and to the bottom bracket
as shown.
NO. 6 SCEW EYE
PULL ROPE
BOTTOM BRACKET
PULL ROPE
WARNING
Please Do Not Return This Product To The Store. Call Us Directly! Our Trained Technicians Will Answer Your Questions and/or Ship Any Parts
You May Need.You can reach us Toll Free at 1-888-827-3667 for Consumer Assistance or online at www.Wayne-Dalton.com
36
Tools Needed:
Power Drill
1/8” Drill Bit