Filter
Top Products
Please Do Not Return This Product To The Store. Contact your local Wayne-Dalton dealer. To find your local Wayne-Dalton dealer, refer to your local
yellow pages business listings or go to the Find a Dealer section online at www.Wayne-Dalton.com
3
Package Contents
(1)TORQUEMASTER
®
SPRING TUBE
DOOR SECTIONS (AS REQUIRED)
(2) TOP BRACKET SLIDE
1/4”-14 X 5/8” SELF TAPPING
SCREWS (AS REQUIRED)
(4) 1/4”-20 X 5/8”
CARRIAGE BOLTS
(4) 1/4”-20 X 9/16” LARGE
HEAD RIBBED TRACK BOLTS
(2) VERTICAL
TRACK RH/LH
(2) 3/8”-16 X 3/4”
TRUSS HEAD BOLTS
(1) CENTER BRACKET
ASSEMBLY
(2) QUICK INSTALL RH/LH
FLAGANGLE (AS REQUIRED)
(2) FULLY ADJUSTABLE RH/LH
FLAGANGLE (AS REQUIRED)
(2) HORIZONTAL TRACK RH/LH
NOTE: DEPENDING ON THE DOOR MODEL, SOME PARTS LISTED WILL NOT BE SUPPLIED IF NOT
NECESSARY. REAR SUPPORTS MAY OR MAY NOT BE INCLUDED WITH YOUR DOOR.
ROLLERS
(AS REQUIRED)
COUNTER COVERS
(AS REQUIRED)
IDRIVE
®
OPERATOR
(SOLD SEPERATELY)
(1) OPERATOR BRACKET
LUBRICATING OIL
(AS REQUIRED)
(2) HORIZONTAL ANGLE
(80” OR 94”)
(AS REQUIRED)
(2) TOP BRACKET BASE
COUNTER GEAR
(AS REQUIRED)
5/16” X 1 5/8” HEX HEAD LAG
SCREWS (AS REQUIRED)
(1) LOOSE WINDING SHAFT
(SINGLE SPRING ONLY)
RIGHT AND LEFT CABLE
DRUM ASSEMBLIES
WEATHER SEAL & NAILS
(IF INCLUDED)
RIGHT & LEFT
DRUM WRAPS
1/4”- 20 FLANGED HEX
NUTS (AS REQUIRED)
RIGHT & LEFT
END BRACKETS
Q.I. JAMB BRACKETS
(AS REQUIRED)
(2) 3/8”- 16 HEX NUTS
36 TOOTH WORM GEAR
(AS REQUIRED)
(2) #10 PHILLIPS
HEAD SCREWS
DOOR STOP & NAILS
(IF INCLUDED)
1/4”-20 X 7/8” SELF DRILLING
SCREWS (AS REQUIRED)
1/4” - 20 X 9/16” TRACK
BOLTS
PULL ROPE &
SCREW EYE
(IF INCLUDED)
F.A. JAMB BRACKETS
(AS REQUIRED)
PRE-INSTALLATION