Filter
Top Products
Tools Needed:
Please Do Not Return This Product To The Store. Contact your local Wayne-Dalton dealer. To find your local Wayne-Dalton dealer, refer to your local
yellow pages business listings or go to the Find a Dealer section online at www.Wayne-Dalton.com
17
Top Brackets
Power Drill
7/16” Socket
Driver
To install the L-shaped top brackets, align
the bottom holes in the top bracket base
with the second set of holes from the
endcap.
Fasten using (4) 1/4” - 14 x 5/8” self
tapping screws. Secure the top bracket
slide to the bracket base loosely using (2)
1/4” - 20 x 5/8” carriage bolts and
(2) 1/4” - 20 flanged hex nuts. The bracket
will be tightened and adjusted in Step 15.
Insert rollers into top bracket slide. Repeat
for other side.
10
(4) 1/4” - 14 x 5/8”
SELF TAPPING
SCREWS
TOP BRACKET BASE
TOP BRACKET SLIDE
(2) 1/4” - 20
FLANGED HEX
NUTS
ROLLER
TOP BRACKET SLIDE
TOP SECTION
TOP SECTION
TOP SECTION
(2) 1/4” - 20 x 5/8”
CARRIAGE BOLTS
2ND SET OF HOLES
FROM BOTTOM
INSTALLATION
2ND SET OF HOLES
FROM BOTTOM