Filter
Top Products
®
Appendix A Installation checklists
66 BMTK-SVN01D-EN
Comm5 UCM identification and
location
Each UCM has a unique 12-digit identifier that serves as its address. The
Tracker controller uses the address to communicate with the UCM. The
installer must know the UCM addresses when assigning names to UCMs
during setup.
Use Table 17 to record the name, location, and ID of each UCM (SCCs,
VariTrac CCPs, and I/O modules) connected to the Comm5 link. The 12-
digit identifier is on a sticker attached to the UCM. Some UCMs have
peel-away stickers that can be detached and applied to the table.
Table 17. Comm5 UCM identification and location
Space Comfort Controllers (24 maximum)
Edited name Location or area served 12 digit ID