Filter
Top Products
BMTK-SVN01D-EN 47
®
Chapter 6
PC workstation wiring
The Tracker controller connects to a PC workstation with a direct
connection cable, an internal modem, or an Ethernet connection.
Verify PC workstation specifications
Verify that the PC conforms to the minimum specifications listed on the
insert in the CD jewel case and that the Tracker PC workstation software
is installed.
Direct connection to PC workstation
To make an EIA-232 direct connection between the controller and a PC
workstation, you need an RJ-12 cable and an adaptor matched to the
serial port connector on the PC workstation (Table 10).
Table 10. Cable and adapter specifications for direct connection
Description Trane part number
RJ-12 interface cable 3591 4260
9-pin female modular adapter 3591 4262
25-pin female modular adapter 3591 4263
The cable and adapter are not shipped with the Tracker controller and
must be purchased separately.