Filter
Top Products
System & Station
Program 16 – Assign CO Line Groups (or Dial 9)
3-48 Strata DK Programming 5/99
Program 16 – Assign CO Line Groups (or Dial 9)
Processor Type:
DK14, DK40i, All RCTUs
Program Type:
System
Initialized Default:
All CO lines assigned to the Dial 9 group
Processor Type CO Line Range CO Line Groups Processor Type CO Line Range CO Line Groups
DK14 001~004 01~04 RCTUBA/BB 001~048 01~08
DK40i 001~012 01~08 RCTUC/D 001~144 01~16
RCTUA 001~016 01~08 RCTUE/F 001~200 01~16
LED
Line
Number
CO Line Groups
Dial
9(00)
20
19
18
17
16
15
14
13
12
11
10
09
08
07
06
05
04
03
02
01
SELECT = CO Line Group (see legend)
Only enter the last two digits of the CO line
Group, or enter
for Dial 9 group.
Press
to advance or to go back.
To advance the CO line range, press
located beneath the LCD. Press
for a
LED Buttons = CO line
Specify CO line by setting LEDs as defined by the
table below. When you are finished, all LEDs with
an “X” should be lit.