Filter
Top Products
System & Station
Program *10 – Enhanced 911 Operation
3-40 Strata DK Programming 5/99
Programs *10-11 and *10-12 Overview
Programs 10-11 and 10-12 assign which QSTU2, KSTU2, RSTU2, RSTU, RDSU, PSTU, or
PESU standard telephone ports are connected to the E911 interface unit.
Important! Program 04 Directory Number data must be blank for E911 QSTU2, KSTU2,
RSTU2, or RSTU ports.
Program *10-91 – E911 Interdigital Time
Initialized Default:
15 seconds
Program *10-91 Overview
10-91 assigns the time allowed to dial each digit after dialing 9 when using the E911 feature.
This time will affect the time that LCR or CO Line dial tone is returned when dialing 9. However,
a user can dial a 9+ (non-911) calls normally before receiving LCR or CO line dial tone and the
DK will route the call appropriately.
Program *10-92 – E911 Pause Before Send Timer
Initialized Default:
0 - No pause
Program *10-92 Overview
10-92 assigns the time the DK will wait before sending the Station Primary Directory Number to
the E911 SLT port after the E911 SLT port answers.
Interdigit Timer = 91 01~15 seconds
Interdigit Timer seconds
Pause Timer = 92 0 = No pause
1 = 1.5 second pause
2 = 3 second pause
Pause Timer seconds