Toshiba dk14 Water System User Manual


 
Strata DK Programming 5/99 6-1
Automatic Call Distribution
Automatic Call Distribution 6
This chapter provides ACD programming information for the Strata DK424 system and its
stations. ACD is not available for the DK14 or DK40i.
The programs specific to ACD are listed below.
Program 03 – RSIU, RSSU, PIOU, or PIOUS ACD/MIS Slot Assignments
Program 09 – Auto Attendant Prompt/ACD Group Assignments
Program *09 – ACD Group DID/Tie Line Digit Assignments (use if Program 71 is not used)
Program 10-4 – ACD Parameters
Program 11 – ACD Timing Assignments
Program 14-0 – Loop/Ground Start CO Line Direct Ring to ACD Group Assignments
Program 14-1 – ACD Agent Identification Code Assignments
Program *14-1 – Auto Answer with Zip Tone Assigned to Agent ID
Program 14-2 – ACD Supervisor Passwords
Program *14-2 – DID/Tie/DNIS/ANI Line After Shift and Overflow Substitution Destination
Program 14-3 – Announcement/Music Port Assignments and Queue Pattern
Program 14-4 – Queue Time Out Overflow Destination
Program 14-5 – Overflow Point and Ring No Answer Routing Destination Assignments
Program 14-6 – After Shift Service Destination
Program 14-71 – Queue Size for Alarm (Immediate Assignments)
Program 14-72 – Queue Size for Alarm 1 (See also Timer Program 11-6 in
Strata DK
Programming Manual
)
Program 14-73 – Queue Size for Alarm 2 (See also Timer Program 11-7 in
Strata DK
Programming Manual
)
Program 14-8 – Alarm Pattern Assignments
Program 14-9 – Work Unit Assignments (Work Unit/Stroke Digit Length)
Program 15 – Ground/Loop/Tie/DID Line Options
Program 17 – DID/Tie Line Options
Program 18 – Agent ID Code Name for MIS Assignments
Program 35 – Station Class of Service
Program 39 – Flexible Button Assignments for ACD Telephones (in System and Station
Chapter)
Program 71 – DID/Tie/DNIS/ANI Lines (use if Program *09 is not used)
Star (*) programs are the newer programs, and they are located behind the program of the same
name (e.g., Program *14-2 follows Program 14-2).