Toshiba dk14 Water System User Manual


 
Index
P ~ P
Strata DK Programming 5/99 IN-5
Index
Program *80 – call forward station ring
assignment, 3-174
Program 00-part 1 – software check, 2-12
Program 00-part 2 – RCTU RAM test, 2-15
Program 01-station logical port display and/or
change, 3-1
Program 02 – station physical port display and/or
change, 3-2, 6-3, 6-5
Program 03 – DK424 flexible PCB cabinet slot
assignments, 3-6
RSIU, RSSU, PIOU, PIOUS ACD/MIS slot
assignments, 6-2
Program 04 – station logical port [PDN]
assignment, 3-12
Program 05 – flexible access code numbering,
3-19
Program 09 – auto attendant prompt/ACD
group, 6-3
built-in auto attendant prompt/station
assignments, 3-23
Program 10-1 – system assignments – part 1 of
3, 3-27
Program 10-2 – system assignments – part 2 of
3, 3-30
Program 10-3 – system assignments – part 3 of
3, 3-35
Program 10-4 – ACD/ISDN parameters, 6-6
Program 11 – ACD timing assignments, 6-8
Program 12 – system assignments, basic timing,
3-41
Program 13 – defining the message center, 3-43
Program 14-0 – loop/ground start line direct to
ACD group assignments, 6-12
Program 14-1 – ACD agent ID code
assignments, 6-13
Program 14-2 – ACD supervisor passwords, 6-17
Program 14-3 – announcement/music port and
queue pattern, 6-20
Program 14-4 – queue time out overflow
destination, 6-23
Program 14-5 – overflow point and ring no answer
routing destination, 6-25
Program 14-6 – after shift service destination, 6-29
Program 14-71 – queue size for alarm, immediate
assignments, 6-31
Program 14-72 – queue size for alarm 1, 6-32
Program 14-73 – queue size for alarm 2, 6-33
Program 14-8 – alarm pattern assignments, 6-34
Program 14-9 – work unit assignments, 6-35
Program 15 – ground/loop/tie/DID line options,
3-44, 6-36
Program 16 – assign CO line groups (dial 9 or
801~816), 3-48
Program 17 – DID/tie line options, 3-50, 6-36
Program 18 – agent names for SMIS/MIS
assignments, 6-15
Program 19 – alternate background music source
slot assignment, 3-54
Program 20 – computer and data interface unit
configuration, 3-55
Program 21 – modem pool port assignments, 3-58
Program 22 – computer and DIU station hunting for
data calls, 3-60
Program 32 – automatic preference, 3-87
Program 33 – [PDN]/ [PhDN] station hunting
(voice calls only), 3-90
Program 34 – hold recall timing, 3-94
Program 35 – station class of service, 3-97, 6-36
Program 36 – fixed call forward, 3-101, 3-109
Program 37 – CO, DID, and tie line ring transfer
(camp-on) recall time, 3-103
Program 38 – digital and electronic telephone
keystrip type, 3-105
Program 39 – flexible button assignments, 3-111
Program 40 – station CO line access, 4-4
Program 41 – station outgoing call restriction, 4-6
Program 42-0 – CO line to PBX/centrex connection
& access codes, 4-8
Program 42-1~8 – PBX/centrex access codes, 4-10
Program 43 – 0 + credit card dialing, 4-11
Program 44-1~8 – toll restriction/traveling class
override codes, 4-13
Program 44-91~93 – emergency bypass of forced/
verified account codes, 4-14
Program 45-1 – LCR/toll restriction dial plan,
4-14, 4-15
Program 45-2 – toll restriction disable, 4-19
Program 45-3~6 – special common carrier numbers
& authorization code digit length, 4-20
Program 45-8~9 – toll restriction override code,
4-22
Program 46-10~80 – toll restriction class
parameters, 4-33
Program 46-11~46-81 – toll restriction class (1~8)
parameters, 4-35
Program 46-2~4 – toll restriction allowed/denied
area codes assigned by class, 4-30
Program 47 – toll restriction exception office codes
assigned by area codes (tables 1~16), 4-36