Filter
Top Products
SECTION 6. CARE OF YOUR MACHINE
Dismantling and Assembling
Hook Race Unit
Note:
Turn off the power sw tch and/or unp ug the mach ne.
To dismantle hook race unit:
Raise the needle to its highest position and open the hook cover.
Open the hinged latch of bobbin case and take it out of the
machine.
Open the hook race ring holders and remove the hook race ring.
Remove the hook.
* Clean the hook race with a brush and a soft dry cloth.
Bobbin case
Hook race ring holder
(3) Hook race ring
_4_Hook
(5_ Hook race
To assemble hook race unit:
Hold the hook by the center pin and fit it carefully back into the
hook race, forming a perfect circle with the shuttle driver.
Attach the hook race ring making sure the bottom pin fits into the
notch.
Lock the hook race ring by turning the holders back into position.
Insert the bobbin case.
Pin
(7) Notch
I I L
®
®
Cleaning the Feed Dog
Note:
Turn off the powerswitch and/or unplug the machinebefore
cean ng the feed dog.
Removethe needle and the presser foot,
Removethe needle plate set screwand removethe needle plate,
S
With a brush, clean out dust and lint clogging thefeed dog teeth.
Reset the needle plate.
J
64