Sears 385.4052LX200 Sewing Machine User Manual


 
iMPORTANT SAFETY iNSTRUCTiONS
CAUTION
Yoursewing machine isdesigned and constructedonlyfor HOUSEHOLD use,
Before usingthis sewing machine, read this manual and follow all Safety Rules and Operating instructions,
DANGER- To reduce the risk ofelectric shock:
t. This sewing machine shouldnever be leftunattended when plugged in.Always unplug this sewing machine from the
electricoutlet immediately after using and before cleaning.
2. Always unplug before replacing a sewing machine bulb.Replace bulbwith same type rated 15 Watts.
3. Do not reach for a sewing machine that has fallen intowater. Unplug immediately.
4. Do not place or store thissewing machinewhere itcan fall or be pulledintoa tub or sink.Do notplace or drop itintowater
or other liquid.
WARNING- To reduce the risk of burns,fire, electricshock, or injuryto persons:
1. Do notallowthis sewing machine tobe used as a toy.Close attention is necessary when this sewingmachine is used by
or near children.
2. Use this sewing machine only for its intendeduse as described inthisowner's manual.
Use onlyattachments recommended bythe manufacturer as contained inthis owner's manual.
3. Never operate this sewing machine ifit has a damaged cord or plug,if it isnot working properly,if it has been dropped
or damaged, or dropped intowater.
Return this sewing machineto the nearest Sears store or service center for examination, repair,electricalor mechanical
adjustment.
4. Never operate this sewing machinewith any air opening blocked.Keep ventilationopenings ofthis sewing machine and
foot controller free from accumulationof lint, dust and loose cloth.
5. Never drop or insert any object intoany opening.
6. Do not use outdoors.
7. Do not operate where aerosol (spray) productsare being used or where oxygen is being administered.
8. To disconnect,turn all controls to the off ("_') position,then remove plug from outlet.
9. Do not unplug by pullingon cord.To unplug,grasp the plug,not the cord.
tO. Keep fingers away from all moving parts.Special care is required aroundthe sewing machine needle.
11. Always use the properneedle plate.The wrong plate can cause the needle to break.
12. Do not use bent needles.
13. Do not pull or push fabric while stitching.It may deflect the needle causing itto break.
"14.Switchthis sewing machine off ("O ") when making any adjustment inthe needle area, such as threading the needle,
changingthe needle, threading the bobbin or changing the presser foot, and the like.
15. Always unplugthis sewing machine from the electrical outlet when removingcovers, lubricating,or when making any
otheradjustments mentioned in this owner's manual.
SAVE THESE iNSTRUCTiONS
When usingyour sewing machine for the firstfew times, place a waste fabric under the presser foot and run
the machine without thread for a few minutes.Wipe awayany oilwhich may appear.