Panasonic AW-HE130K Home Security System User Manual


 
z IPv4 network
Network Settings
SelectthemethodinwhichtheIPaddressisconfigured.
Setting value:
Static
EntertheIPaddressinthe[IPaddress(IPv4)]
field.
DHCP
UsetheDHCPfunctiontoconfiguretheIP
address.
Auto(AutoIP)
UsetheDHCPfunctiontoconfiguretheIP
address.IftheDHCPservercannotbefound,
theIPaddresswillbeconfiguredautomatically.
Auto(Advanced)
UsetheDHCPfunctiontobrowsenetwork
addressinformation,andconfigureanunused
IPaddressforthecameraasafixedIPaddress.
TheIPaddressconfiguredwillbeautomatically
determinedbythecamerafromwithinthesubnet
maskrange.IftheDHCPservercannotbe
found,theIPaddresswillbesetto192.168.0.10.
Factory settings:Auto(Advanced)
<NOTE>
•IftheDHCPservercannotobtainanIPaddresswith[Auto(AutoIP)],
searchforanIPaddressbetween169.254.1.0to169.254.254.255
onthesamenetwork,andconfiguretheIPaddress.
IP address (IPv4)
Inputtheunit’sIPaddressherewhentheDHCPfunctionisnot
goingtobeused.Inputanaddressthatwillnotduplicateanexisting
IPaddresswhichhasbeensetforapersonalcomputeroranother
networkcamera.
Factory settings: 192.168.0.10
<NOTE>
•MultipleIPaddressescannotbeusedevenwhentheDHCP
functionisused.FordetailsontheDHCPserversettings,consult
yournetworkadministrator.
Subnet Mask
Inputtheunit’ssubnetmaskhereiftheDHCPfunctionisnotgoingto
beused.
Factory settings: 255.255.255.0
Default gateway
Inputtheunit’sdefaultgatewayiftheDHCPfunctionisnotgoingto
beused.
Factory settings: 192.168.0.1
<NOTE>
•MultipleIPaddressescannotbeusedforthedefaultgatewayeven
whentheDHCPfunctionisused.
FordetailsontheDHCPserversettings,consultyournetwork
administrator.
DNS
WhethertheDNSserveraddressistobeacquiredautomatically
(Auto)ormanually(Manual)isinputhere.
If“Manual”hasbeenselected,theDNSsettingsmustbeestablished.
If“Auto”isselectedwhentheDHCPfunctionisgoingtobeused,the
DNSserveraddressisacquiredautomatically.
Forfurtherdetails,consultyoursystemadministrator.
Factory settings: Auto
Primary server address
Secondary server address
InputtheIPaddressoftheDNSserverifthe“Manual”settinghas
beenselectedfor“DNS”.
FordetailsontheIPaddressoftheDNSserver,consultyoursystem
administrator.
z IPv6 network
Manual
EnableordisablemanualconfigurationoftheIPv6address.
Setting value:
On EntertheIPv6addressmanually.
Off DisablemanualentryoftheIPv6address.
Factory settings: Off
IP address (IPv6)
When[Manual]issetto[On],theIPv6addressmustbeentered
manually.
Besuretoenteranaddressuniquefromotherdevices.
<NOTE>
•WhenconnectingtothemanuallyspecifiedIPaddressthrougha
router,useanIPv6-compatiblerouter,andenabletheautomatic
configurationfunctionfortheIPv6address.Besuretoconfigure
anIPv6addressthatincludestheprefixinformationprovided
bytheIPv6-compatiblerouter.Fordetails,refertotheoperating
instructionsfortherouter.
Default gateway
When[Manual]issetto[On]for[IPv6network],enterthedefault
gatewayfortheunit’sIPv6network.
Factory settings: blank
DHCPv6
EnableordisableuseoftheIPv6DHCPfunction.
ConfiguretheDHCPserversothatthesameIPaddressisnot
configuredforacomputerthatdoesnotusetheDHCPfunctionand
othernetworkcameras.Fordetailsonserversettings,consultyour
networkadministrator.
Setting value:
On UsetheIPv6DHCPfunction.
Off DonotusetheIPv6DHCPfunction.
Factory settings: Off
Primary DNS server address
Secondary DNS server address
EntertheIPv6addressoftheDNSserver.
FordetailsontheIPv6addressoftheDNSserver,consultyour
systemadministrator.
z Common (to IPv6/IPv4)
HTTP port
Portnumbersareallocatedseparately.
Setting range: 1to65535
Thefollowingportnumbersareusedbytheunitsotheycannotbe
used.
20,21,23,25,42,53,67,68,69,110,123,161,162,443,554,995,
10669,10670,59000to61000
Factory settings: 80
Line speed
Selectoneofthefollowingdatalinespeeds.Normally,itis
recommendedthatthe“Auto”defaultsettingbeused.
Setting value:
Auto Thelinespeedissetautomatically.
100M-Full 100Mbpsfullduplex
100M-Half 100Mbpshalfduplex
10M-Full 10Mbpsfullduplex
10M-Half 10Mbpshalfduplex
Factory settings: Auto
90
Web screen configurations (continued)
91