Panasonic AW-HE130K Home Security System User Manual


 
Basic operations
Cameramenusaredisplayedonthemonitorwhentheunit’ssettingsare
tobeselected.
Themonitorisconnectedtothevideosignaloutputconnector.
Thebasiccameramenuoperationsinvolvedisplayingsub-menusfrom
theTopMenuitems,andselectingsettingsonthesub-menus.
Somesub-menushavemenuitemsforperformingmoredetailed
settings.
Thecameramenuoperationsareconductedusingthewirelessremote
control.
Ifacontrollerisconnected,theycanalsobeconductedusingthe
controller.
<NOTE>
•Checkthatyourcontrolleristhefollowingversion.Iftheversionis
older,consultyourlocaldealer.
AW-RP50:Ver3.00.00orlater
AW-RP120:Ver2.00.00orlater
AK-HRP200:Ver4.00-00-0.00orlater
Describedbelowarethebasicoperationsforchangingthecamera
menuitemsettingsusingthewirelessremotecontrolandcontroller
(AW-RP50,AW-RP120orAW-HRP200).
Only the steps taken using the wireless remote control will be
described here for the operations conducted to select and set
the items.
For details of the operations conducted using the controller,
substitute “controller” for “wireless remote control” when
reading the basic operations.
Refer to the operating instructions for the controller.
Wireless remote control and controller operations
Camera menu operation Wireless remote control
Controller
AW-RP50 AW-RP120 AK-HRP200
Selecting a camera to
operate
Pressthe<CAM1>,<CAM2>,
<CAM3>,or<CAM4>button.
Pressthe<CAMERASTATUS>
or<SELECTION>button.
Pressthe<CAMERASTATUS>
or<SELECTION>button.
1.
Pressandholdthe<SELECT>
(cameraselection)buttonfor
about2seconds.
→Thecameranumber
inthecameranumber
displayareablinks.
2.Pressthelit<DATA
SET>buttons(<UP>and
<DOWN>).
→Pressthelit<DATASET>
buttons(<UP>and<DOWN>)
toselectthecameranumber.
3.Pressthe<SELECT>
(cameraselection)button.
→Controloftheselected
cameraisenabled.
Displaying the Top Menu
Pressandholdthe<MENU>
buttonforabout2seconds.
Pressandholdthe<CAMERA
OSD>buttonforabout2
seconds.
Pressandholdthe<CAMERA
OSD>buttonforabout2
seconds.
Pressandholdthe<CHARA/
MENU>buttonforabout2
seconds.
Selecting items
Pressthe<4>,<5>,<b>,or
<a>button.
Turnthe<F1>dial. Turnthe<F1>dial.
Turnthe<SELECT>dial.
Displaying sub-menus
Pressthe<M>button.
Pressthe<F1>dial. Turnthe<F1>dial.
Pressthe<SELECT>dial.
Returning to the previous
menu
Placethecursoron[Return],
andpressthe<M>button.
Placethecursoron[Return],
andpressthe<F1>dial.
Placethecursoron[Return],
andpressthe<F1>dial.
Placethecursoron[Return],
andpressthe<SELECT>dial.
Changing settings
Placethecursorontheitem
youwanttochange,
<M>
button
tomakethesetting
valueblink.
Changethevalueusingthe
<4>,<5>,<b>,or<a>
button,andpressthe<M>
buttontoconfirm.
1.Pressthe<F1>dialtomake
thesettingvalueblink.
2.Turnthe<F1>dialtochange
thesettingvalue.
3.Pressthe<F1>dialto
confirmthesettingvalue
(blinkingstops).
1.Pressthe<F1>dialtomake
thesettingvalueblink.
2.Turnthe<F1>dialtochange
thesettingvalue.
3.Pressthe<F1>dialto
confirmthesettingvalue
(blinkingstops).
1.
Pressthe<SELECT>dialto
makethesettingvalueblink.
2.Turnthe<SELECT>dialto
changethesettingvalue.
3.Pressthe<SELECT>dial
toconfirmthesettingvalue
(blinkingstops).
Canceling setting
changes
TaptheMENUbutton(hold
forlessthan2seconds)while
thesettingvalueisblinking.
Exiting camera menu
operations
Pressandholdthe<MENU>
buttonforabout2seconds.
Pressandholdthe<CAMERA
OSD>buttonforabout2
seconds.
Pressandholdthe<CAMERA
OSD>buttonforabout2
seconds.
Pressandholdthe<CHARA/
MENU>buttonforabout2
seconds.
<NOTE>
•PerformthemenuoperationsandexitfromthemenususingthecontrollerwhichdisplayedtheTopMenu.
Ifamenuoperationhasbeenperformedoramenuhasbeenexitedusinganothercontroller,firstdisplaytheTopMenuandexitfromitusingone
controller,andthendisplaytheTopMenuandexitfromitusingtheothercontroller.
•Theproceduresusedforthisunit’smenuoperationsmaydifferfromtheonesusedfortheconvertiblecamerasandHDintegratedcameraswhich
havealreadybeenreleasedonthemarket.Fordetails,refertotheOperatingInstructionsofthecameraconcerned.
•Theresponsespeedofthecameradiffersslightlydependingonthecontrollerused.
36
37